(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The horizontal jumper over the J48 and J46 pins is in the Storage position.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumpers over the J48, J46, J44 and J42 positions are both in the storage position.
(Slave with CLJ)
The jumper over the J44 and J42 positions is in the storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J44 and J42 pins is in the storage position.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
맥스터 30gb 하드가 하나 있는데
점퍼 세팅할때마다 애를 먹는다 -_-
다른 하드들은 대부분 하드에 그림으로라도 설명이 되어 있는데
내가 가지고 있는 이 하드는 그런 설명이 없는 것이다.
점퍼 세팅하느라 애먹었다 정말..
다음 부터 고생 안하기 위해
저장
반응형
